Regular Paper

[OPTICAL REVIEW Vol. 21, No. 1 (2014) 43-47]
© 2014 The Japan Society of Applied Physics

Reliability Study on High-Power 638 nm Broad Stripe Laser Diode

Hiroshi MITSUYAMA*, Takashi MOTODA, Takehiro NISHIDA, Kaoru KADOIWA, and Tetsuya YAGI

High Frequency and Optical Device Works, Mitsubishi Electric Corporation, Itami, Hyogo 664-8641, Japan

(Received June 25, 2013; Accepted October 28, 2013)

High-power laser diodes (LDs) are strongly demanded as a light source of display applications. In this work, the reliability of a high-power 638 nm broad stripe (BS) LD was studied from the viewpoint of not only gradual degradation but also catastrophic optical degradation (COD) at a front facet. Long term acceleration aging tests for the 638 nm BS-LD with the window-mirror structure by using Zn diffusion were performed. It was confirmed that COD only occurs at a high output power and this mode was dominant compared with gradual degradation. The result also revealed that the mean time to failure due to COD was proportional to optical density to the power of -3.2. It is clarified that maintaining a low optical output power density is essential to develop high-power and highly reliable red BS-LDs.

Key words: red, laser diode, window-mirror structure, catastrophic optical degradation, mean time to failure


*E-mail address: Mitsuyama.Hiroshi@cs.MitsubishiElectric.co.jp

 

© 1994-2014 The Japan Society of Applied Physics
Produced, Developed, and Maintained by The Optical Society of Japan (An Affiliate of the Japan Society of Applied Physics)
Printed in Japan by Komiyama Printing Co., Ltd.

mail to Editorial Office, OPTICAL REVIEW