Regular Paper

[OPTICAL REVIEW Vol. 21, No. 6 (2014) 791-794]
© 2014 The Japan Society of Applied Physics

Research on Mechanism and Application of Effect of Adjustment Errors in Aspheric Surface Stitching Interferometry

Yujing QIAO*, Hongxin ZHANG, Ning LV, Yanchao TANG, and Junshi LI

School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, China

(Received June 18, 2014; Accepted September 22, 2014)

Due to the existence of imprecise fitting of subapertures' overlap zone, the accumulation of adjustment errors is significant during the measurement of aspheric surface by stitching interferometry. Theoretical analysis indicates that the effect and the appearance of three-direction adjustment errors accords with that of Seidel aberration, of which the axial error leads defocus, third-order spherical aberration and higher-order errors of wave front distribution. Based on the analysis we have made, a correction model has been established, and the estimated values of adjustment errors have been acquired. By correcting the higher-order aberration in the model, fitting precision of subapertures' overlap zone can be improved. Experiment for comparison shows that, after fitting, the value of both residual error and uncertainty of measurement become smaller than those values obtained by traditional correction method of three-direction adjustment error, which proves that the stitching precision of proposed method is higher.

Key words: aspheric surface, stitching measure, adjustment errors, correction model, systematic aberration


*E-mail address: qiaoyujing@sina.com

 

© 1994-2014 The Japan Society of Applied Physics
Produced, Developed, and Maintained by The Optical Society of Japan (An Affiliate of the Japan Society of Applied Physics)
Printed in Japan by Komiyama Printing Co., Ltd.

mail to Editorial Office, OPTICAL REVIEW